Konfigurasi Awal Mikrotik

Langsung aja ya

1. Login ke mikrotik
user=root
password=(kosong)



2. Cek Interface di mikrotik
[admin@mikrotik] > interface pr
Flags: D - dynamic, X - disabled, R - running, S - slave
# NAME TYPE MTU
0 R Ether0 ether 1500
1 R Ether1 ether 1500
2 X pppoe-out1 pppoe-out


Ether0 = interface WAN (KABEL SPEEDY)

Ether1 = interface LAN (KABEL LOCAL)

3. Ganti nama interface dengan command

[admin@mikrotik] > interface set 0 name=SPEEDY

[admin@mikrotik] > interface set 1 name=LAN

Gunanya sih supaya engga bingung ..

4. masukkan IP address di setiap interfaces

contoh:
SPEEDY > 192.168.1.100
LAN > 155.166.0.1

command :
[admin@mikrotik] > ip address add interface=SPEEDY address=192.168.1.100
[admin@mikrotik] > ip address add interface=LAN address=155.166.0.1

5. Modem sebagai gateway
[admin@mikrotik] > ip route add gateway=192.168.1.1

6. Setting DNS telkom
DNS 1 = 203.130.196.5
DNS 2 = 203.130.208.18

[admin@mikrotik] > ip dns set primary-dns=203.130.196.5 secondary-dns=203.130.208.18
[admin@mikrotik] > ip dns set allow-remote-requests=yes

7. Setting NAT agar bandwith SPEEDY share ke lan
[admin@mikrotik] > ip firewall nat add chain=srcnat out-interface=SPEEDY action=masquerade